Satellite | Consumer Electronics Equipment

Posts Tagged ‘satellite’

Receiver Ihub

Tuesday, February 23rd, 2010

It has now become a requisite for you to enter the IHUB serial number into your INCONFIG. So if you are using sonicview 360 Premier/ELITE/8000 HD and are running the IHUB, make sure you comply with the above, for not only has this been made mandatory, the IHUB server is also going to check for it actively from now onwards.

And you simply can’t afford to go wrong with your I-Hub serial numbers, though there are many who have reported of having encountered problems while entering the serial numbers correctly. Presented here is a technique recommended by experts that remedies the problem by enabling you to enter the numbers correctly every time you try. The buttons that you will need to use on your remote control for the SV8000HD, and Premier receivers are the following:

A= Rewind button (Double arrows to the left)

B= Slow button (Vertical line and right arrow)

C= Fast Forward button (Double arrows to the right)

D= Stop button (Button with square on it)

E= Play button (Round button with big right arrow)

F= Pause button (Double vertical lines)

For instance, for 5e, the procedure that you will have to follow is to press the number 5 followed by pressing the Play button. This brings up the serial number line as 5E. This is the procedure that should be followed until all the numbers have been entered. This will make all the lower case letters on the dongle serial number to show up as capitals when they are entered.

The best thing that you can do is to write the numbers or letters of the dongle serial number on a separate piece of paper separated into neat groups with each group containing 2 numbers. So it should look something like 5e/02/f3/01/ etc, until you have the complete serial number. Then go to your TV and enter them patiently and with utmost care. You can bet it will work every time. Entering the numbers on a SV8000HD is easy as you can do it in your own time. However, the same cannot be said of the Premier since here you will be required to enter the numbers quickly as the cursor tends to move to the next set of numbers and will obviously screw the sequence up.

So, these simple steps should be enough to enter your sonicview IHUB serial number in IPCONFIG without an anomaly, as FTA buffs at FTA KEYS point out. And if you think you can do with a bit of consultation with others on this, be at FTA BLOG.

I found more Products related to Your Search: